supported_hardware:rosim
Differences
This shows you the differences between two versions of the page.
|
supported_hardware:rosim [2016/05/18 14:17] 127.0.0.1 external edit |
supported_hardware:rosim [2019/07/02 15:27] (current) James Sentman added link to external plugin file |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ====Rosim Traffic and Parking Systems=== | ====Rosim Traffic and Parking Systems=== | ||
| + | |||
| + | **Note:** the Rosim plugin is no longer included as part of the standard distribution of XTension. To make use of the plugin please download it from [[https://machomeautomation.com/files/rosim_v1.3.zip|here]], Unzip the file and use the “Install Plugin” from the Database menu. | ||
| {{:supported_hardware:rosim_hardware.jpg |}} [[http://www.rosimits.com/index.php|Rosim]] make wireless vehical and traffic sensing systems. Easier and cheaper than cutting for a loop and sensor installation it needs only that a plug be cut out of the road to insert the wireless sensor. These sensors report to an access point and XTension connects to that access point. A “sense” or “no-sense” unit in XTension can be created to correspond to the state of any sensor connected to that access point. | {{:supported_hardware:rosim_hardware.jpg |}} [[http://www.rosimits.com/index.php|Rosim]] make wireless vehical and traffic sensing systems. Easier and cheaper than cutting for a loop and sensor installation it needs only that a plug be cut out of the road to insert the wireless sensor. These sensors report to an access point and XTension connects to that access point. A “sense” or “no-sense” unit in XTension can be created to correspond to the state of any sensor connected to that access point. | ||
| - | Setting up in XTension is different than other devices as the Rosim access point will not accept an incoming connection, but will only make an outgoing connection. Therefore the “address” of the connection setup in XTension is ignored and the “port” setting is actually used to start a listening server on your XTension machine. The port number can be any “high” port (meaning above 1024) that doesn’t interfere with any other services that you’re running. | + | The device makes an outgoing connection to XTension, unlike most devices which listen for an incoming connection from their controller. The rosim configuration app must be used to point it to the IP address of your XTension machine and the port you select in the plugin setup. |
| - | The IP address of your XTension machine and the port you’ve selected need to be set into the ethernet configuration of the Rosim WAP. After doing so it will connect to XTension and start sending us status data from the sensors. | + | Once the XTension interface is enabled and the configuration in the Rosim setup it will connect to XTension and begin sending us the data. |
supported_hardware/rosim.1463581028.txt.gz · Last modified: 2016/05/18 14:17 by 127.0.0.1
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
