Mac Home Automation

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
=====Plugins=====

This is a list of the currently supported interfaces. For a discussion of some of the modules and devices supported by these interfaces see the [[:supported modules|Supported Modules]] section. Most of these are included in the regular XTension download. Others may have to be installed separately. See the individual pages for more info.

===Apple’s Home Kit===
  * [[homekit]] Control XTension units via Siri and Apple’s Home App on MacOS, iOS and tvOS devices.

===Z-Wave Interfaces===
  * [[Hubitat]] A plugin for the [[https://hubitat.com/|Hubitat]] ZWave/Zigbee device was added in XTension v 9.4.35
  * [[veraui7|Vera UI7 Protocol]] The new Vera UI7 interface protocol. This will support the new features of ZWave plus like Central Scene support. If you’re starting a new setup then just select the UI7 version in XTension and continue. If you’re converting an existing setup then please read the article carefully before converting as there is a specific work flow to do that. It is simple, but will save you a lot of manual unit editing later if you do it properly.
  * [[Vera]] from Vera Control Ltd, previously Micasa Vera. This is our choice for best ZWave interface.
    * Legacy interfaces:
      * [[Vizia]] Leviton Vizia Z-Wave interface
      * [[ZTroller]] HomeSeer Z-Troller Z-Wave interface
      * [[ZStick]] Aeon Labs Z-Stick Z-Wave Interface

===Lutron Caseta and RadioRA Hubs===
  * [[radiora2]] Control and monitoring of Lutron’s RadioRA or Caseta Pro Hubs

===X10 Powerline Protocol Devices===
  * [[XTB-II]] (replacement for the CM11a and our pick for best X10 interface currently available)
  * [[CM11A]] (X10)
  * [[Lynx]] (X10)
    * Legacy X10 Interfaces:
      * [[CM15A]] (X10 and X10 wireless receive and transmit) 
      * [[Powerlinc 1132U]] and PowerlincCU (1132CU) (Smarthome X10 Powerline Interface)
      * [[Powerlink 1132b]] (Smarthome serial X10 Powerline Interface)

===WiFi Plugs, Switches and Bulbs===
  * [[wiz|Wiz Connected]] WiFi connected bulbs from Phillips.
  * [[Lifx|Lifx]] very nice wifi connected color and color temperature capable bulbs and displays.
  * [[TPLink]] TP-Link / Kasa Outlets, Power Strips as well as their color and color temperature capable bulbs
  

===UPB Universal Powerline Protocol Interfaces===
  * [[UPB PIM]] UPB is a popular alternative to X10 and Insteon as a high powered powerline protocol.


===X10 Wireless Receivers/Transmitters===
  * [[W800]] (X10 wireless and X10 Security)
  * [[MR26]] (X10 Wireless)
  * [[CM19]] (X10 Wireless receive and transmit)
  * [[CM15A]] (X10 Wireless and Security. Receive and Transmit)
  * [[RFX]] (X10 Wireless and Security, Oregon Scientific devices)

===Amazon Alexa Bridge===
  * [[alexa]] Control your XTension devices with your Amazon Alexa and Echo devices.

===Insteon===
  * [[supported_hardware:veraui7|]]Some insteon devices are supported by the Vera device. The support is somewhat limited however so please verify that what you want to do is supported before investing in equipment. If the device is supported by the Vera then it should be supported by XTension connecting to the Vera. If you find a device that XTension does not support we can gather the data necessary to make it work.

===IR Tranmission and Remote Control===
  * [[itach]] Global Cache IR and other sensor and control devices
  * [[veraui7]] The Vera plugin also supports their IR Remote unit by allowing you to specify the IR code in the Unit settings if you have an IR compatible sending device connected to your Vera.

===mySensors===
  * [[mySensors]] XTension is now a fully featured controller for the [[http://mySensors.org|mySensors]] arduino based sensor system.

===Alarm Systems===
  * [[Ad2usb]] the AD2USB interface for Ademco/Honeywell Security systems

===xBee Radio Connected Devices===
  * [[xBee]] xBee radios for remote monitoring, control and serial data!

===Zigbee===
  * [[hubitat]] Hubitat device plugin also supports ZigBee devices.
  * [[hue]] Phillips Hue Bridge
  * [[supported_hardware:veraui7|Vera UI7]] New Vera plugin also supports ZigBee devices.
  * [[vera]] The legacy Vera Plus plugin supports ZigBee devices.

===Analog/Digital I/O and data capture===
  * [[pigpio]] Raspberry Pi GPIO
  * [[Barix]] (barix devices)
  * [[Lynx]]
  * [[WeedTech]] Weeder data capture cards.
  * [[MaxSonar]] Sonar rangefinder.
  * [[itach]] Global Cache Devices
  * [[controlbyweb]] Control By Web Devices
 
===RFID Receivers===
  * [[Parallax]] Short range passive RFID Receiver.
    * Legacy Devices:
      * [[Ananiah Electronics]] Long range active RFID Receiver.

===Thermostats===
  * Any ZWave thermostat will work with the [[supported_hardware:hubitat|Hubitat]] or [[supported_hardware:veraui7|Vera]] interface.
  * [[radiothermostat|Wifi Thermostat]] the USNAP wifi radio thermostat is now directly supported.
  * [[Omnistat|HAI Omnistat Thermostat]] The HAI Omnistat line of thermostats is now directly supported.
  * [[RCS485|RCS-485 Serial Communicating Thermostat]] RCS serial version of their thermostat is now directly supported.
  * [[aprilaire|Aprilaire or other STATNET Thermostat]] AprilAires communicating thermostat line.

===Ceiling Fans===
  * [[haiku|Haiku/SenseMe]] WiFi Enabled Fans

===Dallas 1-Wire===
  * Use the new [[kits:onewire|XTension 1-Wire to Wifi Kit!]]
  * 1-wire temperature sensors are supported through the [[Barix]] device interface.
  * Additional 1-wire devices can be connected through an [[arduino]] interface if you dont mind a little code.

===Do It Yourself Interface===
  * [[DIY]] Simple method of rolling your own interface to non-supported devices.
  * [[arduino|Arduino]] a simple text protocol for connecting to arduino or other similar DIY style devices with a simple protocol and example code.

===HTTP/JSON===
  * the [[JSON]] server interface handles either simple web requests to send data to a unit or the parsing of complicated JSON data structures to take whatever action is necessary. Just about anything that makes a web request via a simple form or via a JSON packet can be used to control units via this interface. This is a good way to control things in XTension with a simple curl request from other devices or the command line.
  * the [[supported_hardware:serverevents|Server-Sent Events]] plugin can connect to a standard HTML Server-Sent events stream and convert event receptions into XTension unit actions.

===Wireless Tags===
  * [[wireless tags]] from [[https://www.mytaglist.com]] now supported via the json interface in build #846

===Geofences===
  * Any geofence app that has the ability to make an HTTP request when entering or exiting can be used with the [[supported_hardware:json|JSON interface]]
  * An XTension user is also the developer of [[https://itunes.apple.com/US/app/id1166722212|mGeofence]] which works great with XTension and the JSON server.
  * Locative is dead, long live Locative! While the cloud features are no longer available the app itself continues to be available and the cloud is not necessary for use with XTension. No need to switch if you have this working. We have a [[tutorials:locative|Locative tutorial]]
  * another method of setting up geofences with drop box and IFTT can be seen [[tutorials:geofenceiftt|here]]
  * Geohopper is supported as of build 897 with enhancements to the [[supported_hardware:json|JSON interface]]

===Traffic or Parking Space Management===
  * [[rosim|Rosim]] Wireless car sensor for traffic sensing or parking space monitoring.
 

===Bluetooth LE Devices===
  * [[switchbot|Switchbot]] Battery operated physical button pushing and switch toggling robot.

===Video===
  * [[:video_pitcher|Video Pitcher]] to “pitch” video from many IP cameras into XTension for display in Views and Web Remote pages. Also offering recording and video processing. 
  * [[securityspy|Security Spy]] Support for getting motion and recording data out of the excellent Mac NVR software [[https://www.bensoftware.com/securityspy/|Security Spy]]

===UPS (Uninterruptible Power Supplies)===
  * [[UPS]] UPS power and battery monitoring.
  * [[APC|Remote APC UPS monitoring]] via apcupsd


===Plugins of Uncategorical Category===
  * [[ping|Ping Plugin]] Units state linked to returning a ping. Many informational and statistical info available.
  * [[databasesharing|Database Sharing]] Lets you share units and scripts from one XTension install to another.
  * [[airport|AirPort Monitoring]] watch the state of your airports, track connected devices and perform reboots of AirPort Basestations.
  * [[networkpresence|Network Presence]] interface watches devices coming and going on your local network via the arp table and can also ping remote hosts on the internet.
  * [[websocket|Websocket Interface]] Roll your own interfaces to your XTension database, or connect a device that knows how to speak this protocol. Sends standard JSON data back and forth for commands or value changes. Comes with a simple browser example with the javascript necessary to receive and parse the data from XTension as well as send commands back and forth.
  * [[rainbowhat|Pimoroni Rainbow Hat for the Raspberry Pi]] Get button events and control the display and LED’s on a Pimoroni Rainbow Hat equipped Raspberry Pi.
Mac Home Automation

User Tools

Site Tools

Page Tools
