Mac Home Automation

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====CM19====
**NOTE: The CM19 plugin will not be rebuilt to support OSX Catalina and newer and will no longer be included in the distribution. If you are runnin Mojave or earlier and wish to continue to use the CM19 plugin please download the [[https://machomeautomation.com/files/xtension/legacy_plugins.zip|Legacy Plugins file]] and use the “Install Plugin...” menu item from the Database menu to install it. This will install the plugin in your database and you can continue to use it as long as you do not update the OS past Mojave.**


{{ :supported_hardware:cm19_altered.jpg|CM19 altered with coax connector}}
  * CM19 is a USB version of the [[MR26]] but adds the ability to transmit X10 wireless and [[ninja]] camera mount controls. 
  * Since the device does not implement a serial number in it's USB implementation only a single one can be connected to XTension at a time.
  * XTension supports both receiving of wireless X10 (remotes and motion sensors only, this device does not receive security devices) and the transmitting of X10 wireless and [[ninja]] camera mount remote control.
  * CM19 support is built into XTension and does not require any additional plugins or licenses.
  * The picture to the right shows the CM19 as mounted in my data closet and altered by the replacement of the rat tail antenna with a coax connector. The device ships with a loose wire antenna that can be replaced with a coax connection very similarly to the [[mr26]] with a coax connector for better range. Instructions can be found [[http://www.shed.com/tutor/mr26ant.html|here on the shed.com site.]] for those who are more concerned with their reception than their warranty.
Mac Home Automation

User Tools

Site Tools

Page Tools
