Mac Home Automation

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

=====XTension GPIO Kit API: Controlling GPIO outputs=====
GPIO Endpoints setup as outputs can be controlled with a simple GET request to the /api/gpio url:  http://xtgpio.local/api/gpio

To turn on gpio 3:
http://xtgpio.local/api/gpio?index=3&command=on

To turn off gpio 1:
http://xtgpio.local/api/gpio?index=1&command=off

Both index and command are required elements. Leaving any of them off will return an error instead. If you attempt to control a GPIO Endpoint that is lower than 0 or above the number of available GPIO endpoints an error is returned. If you try to control a GPIO channel that is not configured as an output an error will be returned.

Upon success the same json data as returned from the /api/data request is returned showing the new values if any that were changed by your command.

(BETA: Eventually the setvalue command will also be supported for endpoints like the servo and DAC outputs. This is not implemented yet in the current beta)

Mac Home Automation

User Tools

Site Tools

Page Tools