Mac Home Automation

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
=====Macintosh Home Automation With XTension=====
{{:xtensionicon.png |}}XTension has been automating the homes of Macintosh users since 1996! XTension provides more connections to more devices and protocols than any other comparable piece of software. Want to use an inexpensive X10 motion sensor to trigger ZWave lights? Do you want to integrate a kickstarter based sensor you bought into from it’s IFTT page and have it control the Zigbee lamp colors to alert you of a fridge outage? Are you a Maker who wants to experiment with Arduino based sensors or interested in the mySensors.com devices? XTension lets you tie all these different things together in one place.

There are so many home automation and monitoring devices out there! Many have iPhone control programs, others have web based control or online engines to build simple logic. When you’ve outgrown the dropdown menu of approved actions and are ready to link all the different systems together you need XTension. 

XTension provides a standardized interface to all the different devices that we support. Using Apple’s standard AppleScript scripting language it’s just as easy to do simple automation tasks as it is with popup menus of actions but you’re not limited to the contents of those popups. Once you’re ready to move beyond the simple abilities provided by other tools XTension provides everything you need to take your home automation to the next level. Automation is more than just having an on/off switch on your phone. It’s having a system that knows what you need so that you don’t have to pull out the iPhone all the time. The problem has always been that it’s not possible to deliver a system that will do this for everybody out of the box, you have to be interested in being an active participant in it and thinking about what it should do. Whether you just want to manage some lights at sunset and keep the kids lights off when they aren’t in their rooms, or if you’re interested in getting under the hood to have better control over what you’re system does and tweaking it to your lifestyle and desires then XTension will provide you the tools.

XTension doesn’t need a “cloud” and so can operate remotely where there is no internet connection. Whenever possible it makes local connections to the devices you are controlling rather than going up to the cloud and back down again. This means faster and more reliable control without the latency of going up to the internet and coming back down for each command. This also means that it will keep running when your internet goes down and won’t slow down or hang up when the kids are streaming NetFlix.

XTension has best of breed web based remote control systems with separate setups for desktop browsers and mobile devices. While basic functionality for unit control is built in, the pages are fully customizable by you with many control types to choose from so that you can build the best interface for your systems just the way you want it. Build the interface by dragging and dropping controls in the Views inside the app and then deploy these interfaces to both the desktop web app or the mobile platform. To use these web interfaces from outside of your local network you will want a dynamic DNS account and some knowledge of configuring your router/airport with NAT to pass those connections back to your XTension server. XTension supports industry standard SSL web connections over these interfaces for safety and security.

=====GET THE LATEST VERSION!====
===Requirements===
  * A [[current:beta|Beta Version]] is available that runs natively on Apple Silicon based machines.
  * Mac OSX 10.10 or later. 
    * Catalina and Big Sur both now fully supported requiring version 9.4.34 or newer. Use the Notarized disk image on the [[current|Current Release Page]]. See the [[tech_notes:catalina|Catalina Support]] page for more info.
    * For 10.14 Mojave Support please be running at least version 9.3.12 and see the [[tech_notes:mojave|Mojave Support Notes]] page.
    * For 10.13, High Sierra, version 9.3.7 or later is absolutely required.
    * For Mac OS versions 10.9 and earlier please run version 9.3.10 or earlier.
  * A Mac running in a closet somewhere as a server, preferably on a UPS.
  * Any or all of the [[supported_hardware:|]] to actually connect to and control something.

===Download===
  * [[current]] 
  * For database functions, motion reports and graphing [[xtdb|]]
  * [[video_pitcher|]] provides support for live views and recording.
  * For those wishing to get started on an older machine we still provide the [[download|PPC Build]] that requires an Intel or PPC machine running 10.6. (this version does not fully support all features and is not actively updated) For more info see the [[tech_notes:osversions|OSX Compatibility Table]]

===Upgrading===
  * If you’re upgrading from an XTension build prior to build 854 you will need to [[download|download and run]] version 854 at least once against your database to upgrade the applescript file format.
  * For any version after 854 you can just download the latest version and run it. A Database backup is done automatically before any changes are made.

===Purchasing===
  * XTension is fully functional in demo mode. You’re limited to 10 units in the database but can otherwise test any connection or device and get to know the app. There is no time limit and no other functionality is hobbled.
  * When you’re ready to purchase please visit the [[buy_xtension|Ordering Page]]
  * XTdb is a separate purchase. It is also fully functional in demo mode but applies a purchase reminder over the graphs that are produced. You can [[http://sentman.com/XTdb.html| purchase XTdb here]]. (note that web page is not updated to reflect the current version that is on the wiki here, but the purchase link is still valid)

===Support===
  * Definitely join our [[http://mail.machomeautomation.com/mailman/listinfo/xtensionlist|Mailing List]]! We have a very active user community and you’ll get lots of suggestions and info from us and the users there. Our users are the best resource! The list is a friendly and open resource happy to provide support to both the new user with simple startup questions or the advanced user with complex automation systems to integrate.
  * You can also contact the authors directly via email at james ampersand for no spam at sentman.com and michael ampersand for no spam at shed.bz

=====Whats New?=====
 A full list of changes and additions is always available on the [[current|current release page]]

<html>
<table><tr><td>
</html>
  * [[supported_hardware:genmon|Genmon Generac Monitoring Plugin]] for connecting to the excellent open source Generac Generator monitor.
  * [[supported_hardware:mqttbroker|MQTT Broker]] Startup an MQTT broker in XTension that any IOT device using that protocol can connect to.
  * [[supported_hardware:rtlamr|rtlamr]] for receiving many smart meter updates via an SDR.
  * [[supported_hardware:rtl_433|rtl_433 plugin]] for receiving just about any wireless 433 mhz sensor and many others.
  * [[supported_hardware:ping|Ping Plugin]] Ping local and remote devices and manage statistics.
  * [[supported_hardware:wiz|Wiz Connected]] Wifi Bulbs and Devices from Phillips.
  * [[supported_hardware:caldav|CalDAV]] Calendar Plugin for CalDAV and Apple Calendar servers.
  * [[supported_hardware:hubitat|]] ZWave/Zigbee device plugin now in Beta.
  * [[wiznet|Wiznet Configurator]] Support for Catalina, Big Sur and Apple Silicon.
  * [[tech_notes:catalina|Catalina]] and Big Sur support.
  * [[kits:onewire|One Wire Temperature Sensor Kit]]
  * [[supported_hardware:alexasudo|The Return of Alexa]]!

 

<html></td><td></html>

  * Plugin for [[supported_hardware:serverevents|HTML Server Events]]
  * Home Kit and Siri support via the [[supported_hardware:homekit|Homekit Plugin]]
  * New [[supported_hardware:tplink|TP-Link and Kasa]] device support plugin.
  * Lutron Caseta and RadioRA2 support via the [[supported_hardware:radiora2|Lutron Plugin]]
  * Raspberry Pi GPIO remote control via the [[supported_hardware:pigpio|Pi GPIO Plugin]]
  * New [[supported_hardware:maxsonar|MaxSonar Plugin]] with glitch filter and Schmitt Trigger processing
  * ZWave Central Scene support via the new [[supported_hardware:veraui7|Vera UI7 interface protocol]].
  * [[tutorials:eventgroups|New mini-tutorial]] for creating house “modes” and working with event groups.
  * [[tutorials:htmlaccess|HTML Access Tutorial]] for controlling any unit via HTML requests.
  * Updated “[[webremote:livemotion|recent event]]” display example.
  * [[tutorials:lightning|Lightning Sensor Tutorial with Arduio and xBee]]


<html></td></tr></table></html>
 
=====Interface Examples=====

{{::animatedgaugesandgraphs.png?direct&450|}}
{{ :unitlist.png?250|}}
{{:videointerface.png?250 |}}
{{ :motionsnapshot.png?250|}}
{{:temperatureinterface.png?250 |}}
{{ :dutycyclewaterfridgegraph.png?250|}}
{{:powermotioninterface.png?250 |}}
{{ :motioninterface.png?250|}}
{{:thermostatinterface.png?250 |}}
{{ :weatherinterface.png?250|}}
{{:interfacestatus.png?250 |}}
{{ :scheduledevents.png?250|}}

=====More Than Remote Control=====
It's easy to build controls for your lights over there from over here. XTension can do this and so much more. Simple or complex scripts can be attached to any action or change in your list of units. The response can be simple, (when motion is detected on the porch turn on the porch lights for half an hour), or complex, (when motion is detected on the porch and it's dark out, turn on the lights for 30 minutes, if we're not home then take a picture from the camera in the driveway and send it via email to my iPhone email account and turn on the kitchen light for 10 minutes to make it look like someone is at home) by supporting the Apple Script language your scripts can be as simple or complex as you like. Start with the basics and add on and never be limited to the actions we happen to think of and stick into a popup menu of capabilities. You need not fear AppleScript! The simple actions are as simple with any other app and the impossible or impractical with menu driven action systems just require a little more thought.

=====Getting Started=====
If you're new to XTension please start at the [[:Getting Started:]] page, otherwise use the index or the search field to find what you're looking for.




This wiki and XTension are the work of [[http://shed.bz/|Michael Ferguson]] and [[http://sentman.com/|James Sentman]]
Mac Home Automation

User Tools

Site Tools

Page Tools
